Yamaha TG500 Portable Generator User Manual


 
128
The Scale Offset parameters set the amount of level offset for each of the four
level-scaling breakpoints set by the “Scale Point” parameters in the preceding screen.
3-3-05: SCALE OFFSET
VOICE EDIT MODE / 3: Full Edit. 3-3: Filter
3-3-05: SCALE OFFSET
BP1
BP1 … BP4 (Breakpoint 1 … 4 offsets)
Range: -127 ... +127
Negative values lower the cutoff frequency, and positive values increase the
cutoff frequency at the corresponding breakpoint. No matter what value is
chosen, the cutoff frequency will never exceed its minimum or maximum value.
When different offset values are applied to adjacent breakpoints, the cutoff
frequency varies smoothly between the breakpoints.
BP2
BP3
BP4
E1 B2 G4 A5
BP1=76
BP2=90
BP3=97
BP4=84
127
80
0
Cutoff frequency
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-3: Filter -> [ENTER]
-> [PAGE] -> 3-3-05: Scale Offset -> [ENTER]