Yamaha TG500 Portable Generator User Manual


 
118
VOICE EDIT MODE / 3: Full Edit. 3-2: AEG
AEG DATA COPY
AEG DATA COPY
This function facilitates voice editing by allowing the amplitude EG data from
any other voice (the “source” voice) to be copied to the current voice. You can copy
an envelope that is close to the type you want, then edit it to produce the required
sound.
Press the [STORE/COPY] key while in the AEG edit mode.
Use the [MEMORY] key to select the internal, preset, or card memory; then use
the [-1/NO] and [+1/YES] keys to select the voice from the which the AEG data is to
be copied.
Once the source voice has been selected, press the [ENTER] key. “Sure?” will
appear on the display.
Press the [+1/YES] key to copy the AEG data, or press [-1/NO] to cancel the
copy operation. Once the copy operation has finished, “Completed!” will appear on
the display briefly, then the display will return to the AEG edit mode.
[PLAY MODE] -> VCE PLAY -> EDIT/COMPARE -> 3: Full Edit -> [ENTER] -> 3-2: AEG -> [ENTER]