Yamaha TG500 Portable Generator User Manual


 
139
VOICE EDIT MODE / 3: Full Edit. 3-5: LFO
3-5-03: SENSITIVITY
3-5-03: SENSITIVITY
The speed of the TG500 LFO can be varied randomly, and according to variations
in keyboard velocity and range. Such variations can produce more natural, musical
effects.
Rnd (Random speed)
Range: 0 … 7
Sets the amount of random LFO speed variation produced each time a note
is played.
When this parameter is set to a value other than “0,” the LFO speed
changes randomly each time a note is played. A setting of “7” produces the
greatest amount of random speed change.
Vel (Velocity sensitivity)
Range: -7 … +7
Determines how the LFO speed changes in response to velocity changes
(e.g. keyboard dynamics).
Plus “+” settings produce higher LFO speed in response to higher velocity
values — i.e. the harder a key is played, the higher the LFO speed. The maxi-
mum setting of “+7” produces the maximum speed variation in response to
velocity changes. Minus “–” settings produce the opposite effect: lower speed
in response to higher velocity. A setting of “+0” results in no speed variation.
Scl (Key scaling)
Range: -7 … +7
Determines how the LFO speed changes in response to the key played.
Plus “+” settings produce higher LFO speed when higher notes on the
keyboard are played. The maximum setting of “+7” produces the maximum
speed variation. Minus “–” settings produce the opposite effect: lower speed
when higher notes are played. A setting of “+0” results in no speed variation.
SclVelRnd
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-5: LFO -> [ENTER]
-> [PAGE] -> 3-5-03: Sensitivity -> [ENTER]