Open as PDF
Your original drum voices should naturally have original names. This function can
be used to assign a name of up to 8 characters to the current drum voice.
DRUM VOICE EDIT M ODE / 2: Level/Nam e
2-2: N A M E
Range: See character list, below
Assigns a name of up to 8 characters to the current drum voice.
Use the [ ] key to move the character cursor to the left, and the [ ] key to
move the cursor to the right. Use the [-1/NO] and [+1/YES] keys to select a
character for the current cursor position. The available characters are listed
The entire name can be cleared by pressing the [EDIT/COMPARE] key
while holding the [UTILITY/SELECT] key, and a space can be entered at the
cursor position by pressing the [STORE/COPY] key while holding the
[PLAY/MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 2: Level/Name -> [ENTER] -> [PAGE]
-> 2-2: Name -> [ENTER]