Open as PDF
VOICE EDIT MODE / 4: Recall/Init.
When you want to program a totally new voice “from scratch,” rather than editing
an existing voice, use this function to initialize all voice parameters.
Press [ENTER] to begin the initialize procedure. The following confirmation
display will appear:
Press [+1/YES] to confirm that you want to go ahead with the initialize operation
(which will erase all current edited data), or press [-1/NO] to cancel.
“Completed!” will appear briefly on the display when the voice data has been
For initial voice parameter, see page 284.
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 4: Recall/Init. -> [ENTER] -> 4-2: Initialize -> [ENTER]