Filter
Top Products
3. The Performance Mode
27
● AN EXAMPLE
Follow these steps to create a 3-layer voice in which you play a bass voice
on the lower octaves of the controlling keyboard (below C3), and piano plus
strings on the upper octaves.
Although we won’t use anywhere near the TG500’s full complement of
performance parameters, this exercise will help you get a feel for the perform-
ance mode and standard editing procedures.
1 Select a Performance Combination
Engage the PERFORMANCE PLAY mode and select any performance
combination, as described in the preceding section.
2 Initialize the Selected Performance Combination
2-1
Make sure that the PERFORMANCE PLAY mode is selected, and then
press the [EDIT/COMPARE] key. Use the [-1/NO] and [+1/YES] keys to select
the “4:Recall/Init.” screen.
LAYER A (Bass)
LAYER B (Piano) +
LAYER C (Strings)
C3