Yamaha TG500 Portable Generator User Manual


 
208
MULIT EDIT MODE / 4: Effect
4-04: OUTOUT
4-04: OUTPUT
These parameters turn the “dry lines” (i.e. the signal paths which bypasses each
effect processor) on or off, determining whether any dry signal output can occur at
OUTPUT 1 and OUTPUT 2.
The instrument to be edited is selected as described on page 198. The currently
selected instrument is shown in square brackets on the upper display line.
Dry1
Range: off, on
Turns the “dry line” bypassing the EFFECT 1 signal processor on or off.
When this parameter is turned “off,” the “WET:DRY” parameters (page 210)
have no effect. If the “Src” in parameter in the proceding screen is set to
“VCE” or “PFM”, this parameter cannot be edited (“---” appears on the dis-
play).
Dry2
Range: off, on
Turns the “dry line” bypassing the EFFECT 2 signal processor on or off.
When this parameter is turned “off,” the “WET:DRY” parameters (page 210)
have no effect. If the “Src” in parameter in the proceding screen is set to
“VCE” or “PFM”, this parameter cannot be edited (“---” appears on the dis-
play).
[PLAY/MODE] -> MLT PLAY -> [EDIT/COMPARE] -> [PAGE] -> 4: Effect -> [ENTER] -> [PAGE]
-> 4-04: Output -> [ENTER]