Yamaha TG500 Portable Generator User Manual


 
1. Setting Up Your System
15
2 Select a DEMO and press [ENTER].
Use the [-1/NO] and [+1/YES] keys to select one of the three demo se-
quences provided, then press [ENTER] to start playback.
3 Press [EXIT] to stop playback.
Press [EXIT] when you want to stop playback. You can now select and
play a different demo, or press [EXIT] again to exit from the demo mode.
Power-on Procedure
Believe it or not, there’s actually a “right” way to turn on a sound system
that will minimize the possibility of damage to the equipment (and your ears!).
1 Make sure your sound system’s volume control and the TG500 volume
control are turned all the way down prior to turning power on.
2 Turn on your keyboard or other MIDI controller.
3 Turn on the TG500.
4 Turn on the sound system.
5 Raise the sound system volume to a reasonable level.
6 Gradually raise the TG500 VOLUME control while playing the keyboard/
controller to set the desired listening level.