Yamaha TG500 Portable Generator User Manual


 
130
This function facilitates voice editing by allowing the filter parameters from any
other voice (the “source” voice) to be copied to the current voice. You can copy a
filter setup that is close to the type you want, then edit it to produce the required
sound.
Press the [STORE/COPY] key while in the filter edit mode.
FILTER DATA COPY
VOICE EDIT MODE / 3: Full Edit. 3-3: Filter
FILTER DATA COPY
Use the [MEMORY] key to select the internal, preset, or card memory; then use
the [-1/NO] and [+1/YES] keys to select the voice from which the filter data is to be
copied.
Once the source voice has been selected, press the [ENTER] key. “Sure?” will
appear on the display.
Press the [+1/YES] key to copy the filter data, or press [-1/NO] to cancel the
copy operation. Once the copy operation has finished, “Completed!” will appear on
the display briefly, then the display will return to the filter edit mode.
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-3: Filter -> [ENTER]