Yamaha TG500 Portable Generator User Manual


 
140
LFO DATA COPY
VOICE EDIT MODE / 3: Full Edit. 3-5: LFO
This function facilitates voice editing by allowing the LFO parameters from any
other voice (the “source” voice) to be copied to the current voice. You can copy an
LFO setup that is close to the type you want, then edit it to produce the required
sound.
Press the [STORE/COPY] key while in the LFO edit mode.
LFO DATA COPY
Use the [MEMORY] key to select the internal, preset, or card memory; then use
the [-1/NO] and [+1/YES] keys to select the voice from the which the LFO data is to
be copied.
Once the source voice has been selected, press the [ENTER] key. “Sure?” will
appear on the display.
Press the [+1/YES] key to copy the LFO data, or press [-1/NO] to cancel the
copy operation. Once the copy operation has finished, “Completed!” will appear on
the display briefly, then the display will return to the LFO edit mode.
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-5: LFO -> [ENTER]