Open as PDF
UTILITY MODE / WAVE EDIT MODE / 3: Initialize
This function erases and initializes all wave memory, the specified type of wave
memory, or a single specified sample.
Press [ENTER] to begin the wave initialize procedure. The following confirmation
display will appear:
Press [+1/YES] to confirm that you want to go ahead with the initialize operation,
or press [-1/NO] to cancel.
When the specified wave memory has been initialized, “Completed!” will appear
briefly on the display.
[UTILITY/SELECT] -> 5: Wave -> [ENTER] -> [EDIT/COMPARE] -> 3: Initialize -> [ENTER]