Yamaha TG500 Portable Generator User Manual


 
38 4. The Multi Mode
SELECTING DIFFERENT INSTRUMENTS FOR EDITING
The currently selected multi instrument (1 of 16) is shown in square brack-
ets in the lower left hand corner of each screen. A different instrument can be
selected for editing in this mode by using the [-1/NO] and [+1/YES] keys while
holding the [UTILITY/SELECT] key.
NO STORE OPERATION REQUIRED
When you’re finished editing a multi setup, simply press the [PLAY
MODE] key to return the MULTI PLAY mode. The edited data is automatically
stored in the multi setup you selected prior to editing — there is no need to
specifically “store” the edited data as there is in the VOICE and PERFORM-
ANCE modes.
The [STORE/COPY] key can, however, be used to copy the current multi
setup to a different location. Operation is the same as in the store procedure
described on page 33.
Further Possibilities …
Be sure to read through the “MULTI EDIT MODE” (page 197) for full
details on all parameters available for multi programming.