Yamaha TG500 Portable Generator User Manual


 
158
VOICE EDIT MODE / 3: Full Edit. 3-7: Effect
3-7-09: CONTROL 1 / 3-7-10: CONTROL 2
0: “off”
1: “Mod.Whl.”
2: “Breath C”
4: “Foot Cnt”
5: “Porta.Sp”
6: “Data Ent”
7: “Foot Vol”
8: “Balance ”
10: “Panpot ”
11: “Express.”
64: “Hold 1 ”
65: “Porta.Sw”
66: “Sostenut”
67: “Soft ”
69: “Hold 2 ”
91: “Effect D”
92: “TremoloD”
93: “Chorus D”
94: “CelesteD”
95: “Phaser D”
96: “Inc. ”
97: “Dec. ”
98: “NRPN LSB”
99: “NRPN MSB”
100: “RPN LSB”
101: “RPN MSB”
121: “AfterTch”
122: “Velocity”
123: “KeyScale”
124: “LFO
EF Param (Effect parameter)
Range: Depends on selected effects.
Selects the effect parameter to be controlled by the specified MIDI device.
“Ef1Prm1” through “Ef1Prm8” on the display stand for “effect 1 parameter 1”
through “effect 1 parameter 8”. Likewise “Ef2Prm1” through “Ef2Prm8” on the
display stand for “effect 2 parameter 1” through “effect 2 parameter 8”. The
parameters available for each effect are different, but the name of the selected
parameter will be shown between the parentheses on the top line of the display.
Parameters that can not be assigned are indicated by dashes (“--------”) instead
of a parameter name. In addition to the indivual effect parameters a range of
send level, balance, and LFO parameters are also available, as listed below:
Ef1Prm1
Ef1Prm2
Ef1Prm3
Ef1Prm4
Ef1Prm5
Ef1Prm6
Ef1Prm7
Ef1Prm8
Ef_Out1a
Ef_Out1b
Ef2Prm1
Ef2Prm2
Ef2Prm3
Ef2Prm4
Ef2Prm5
Ef2Prm6
Ef2Prm7
Ef2Prm8
Ef_Out2a
Ef_Out2b
Ef2_Mix
Out1_Wet
Out2_Wet
Ctrl1Min
Ctrl1Max
LFO_Wave
LFO_Spd
LFO_Dly
Ef_Ins1b
Ef_Ins2a
Ef_Ins2b
MIDI CONTROL CHANGE NUMBER/DEVICE