Yamaha TG500 Portable Generator User Manual


 
73
3-1-12: LAYER INITIALIZE
When you want to program a totally new performance combination “from
scratch,” rather than editing an existing combination, use this function to initialize
layer data.
PERFORMANCE EDIT MODE / 3: Full Edit. 3-1: Layer
3-1-12: LAYER INITIALIZE
Use the [-1/NO] and [+1/YES] keys to select “all” if you want to initialize layer
data currently in the edit buffer, or select “A”, “B”, “C”, or “D” if you only want to
initialize one specific layer.
Press [ENTER] to begin the initialize procedure. The following confirmation
display will appear:
Press [+1/YES] to confirm that you want to go ahead with the initialize operation
(which will erase all current edited data), or press [-1/NO] to cancel.
“Completed!” will appear briefly on the display when the layer data has been
initialized.
For initial layer data, see page 283.
[PLAY MODE] -> PFM PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-1:Layer -> [ENTER]
-> [PAGE] -> 3-1-12 : Initialize -> [ENTER]