Control Panel Options 85
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
Tag Types to Read
Specify which class of tags are to be read and reported during tag reading operations. Duplicate
tags are not reported.
• Class 0 (Class 0 Read attempts)
• Class 1 (Class 1 Read attempts)
• Class 1 Gen2 (C1G2 Read attempts)
A read operation can contain a user-defined number of read attempts. The default for Class 0 tags
is 4 read attempts. This means that when a read operation is performed by pressing the RFID Read
button, 4 reads will be performed internally; the results merged, duplicate tags removed, and the
result is then made available to the application.
Default number of reads for collecting Class 0 tags is 4. Valid values are between 1 and 10.
Default number of reads for collecting Class 1 tags is 1. Valid values are between 1 and 10.
Default number of reads for collecting Class 1 Gen 2 tags is 1. Valid values are between 1 and 10.
Change the attempts value by tapping the drop down list box and selecting a number from the list.
Tap OK to save the change or X to ignore the change and return to the Control Panel. Tap the
Restore Defaults button to return to default values.
C1G2 Q-Value
When scanning large numbers of tags, the C1G2 Q-value sets the amount of time to delay when
sending tag reads to the keyboard buffer. A larger number increases the time delay interval. The
default value is 3. Valid values are between 0 and 15.
Class 0 Singulation
Tap the radio button to specify which singulation method to use during Class 0 read operations.
Selection is grayed out if the Class 0 Tag Type is unchecked. Tap OK to save the change or X to
ignore the change and return to the Control Panel.
