LXE E-EQ-MX3RFIDRG-A Manual

A SERVICE OF

next previous

Read an RFID Tag 19

E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide

Read an RFID Tag

1. Set RFID tag read parameters using Start | Settings | Control Panel | RFID. See Chapter 3

“System Configuration” section titled “RFID”.

2. Set Scanner properties using Start | Settings | Control Panel | Scanner.

3. Open the application or text file that is to gather the data read from tags.

4. Place the MX3-RFID within the boundary parameters of the tag to be read. See “RFID Reader

Scan Range”.

5. Press the RFID Read button.

6. The data gathered from the tag is sent to the open file.

7. Save the file. The tag read data is ready for further processing.

Note: Control Panel parameters established in Display Properties, Power Properties and

Volume & Sounds Properties remain in effect during RFID configuration and the

resulting read functions.

Note: Any tag data retrieved and not saved is lost during a reboot or reset.