138 Summit Client Configuration
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
Global Parameters
Note: Tap the Commit button to save changes. If the panel is closed before tapping the Commit
button, changes are not saved!
Parameter Default Function
RX Diversity On-start on Main How to handle antenna diversity when receiving
packets from the Access Point.
Options are: Main Only (use the main antenna only),
Aux Only (use the auxiliary antenna only), On-start on
Main (on startup, use the main antenna), or On-start on
Aux (on startup, use the auxiliary antenna).
TX Diversity On How to handle antenna diversity when transmitting
packets to the Access Point.
Options are: Main only (use the main antenna only),
Aux only (use the auxiliary antenna only), or On (use
diversity or both antennas).
Preamble Auto The type of radio header, or preamble, for packets.
Options are: Auto, Short, or Long.
G Shortslot Auto 802.1x short slot timing mode.
Options are: Auto, On, or Off.
Roam Trigger -65 dBm If signal strength is less than this trigger value, the
radio looks for a different Access Point with a stronger
signal.
Options are: -50 dBm, -55, -60, -65, -70, or -75 dBm.
Roam Delta 10 dBm The amount by which a different Access Point signal
strength must exceed the current Access Point signal
strength before roaming to the different Access Point is
attempted.
Options are: 5 dBm, 10, 15, 20, 25, 30, or 35 dBm.
Roam Period 10 sec The amount of time to be used to collect signal strength
information from an Access Point before a roaming
decision is made.
Options are: 5 sec, 10, 15, 20, 25, 30, 35, 40, 45, 50,
55, or 60 sec.
Frag Thresh 2346 If the packet size (in bytes) exceeds the specified
number of bytes set in the fragment threshold, the
packet is fragmented (sent as several pieces instead of
as one block). Use a low setting in areas where
communication is poor or where there is a great deal of
radio interference.
Options are: Any number between 256 bytes and 2346
bytes.
