154 Cisco Client Configuration
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
PEAP/MS-CHAP Authentication Configuration
The Microsoft supplicant authenticates a user with the PEAP/MS-CHAP protocol. The Cisco CAB
file without Cisco PEAP must be used with PEAP/MS-CHAP. See “Installing Radio Drivers”,
earlier in this chapter, for more information.
Configuring the PEAP/MS-CHAP Supplicant
Figure 4-28 PEAP/MSCHAP Wireless Network Properties
With the radio parameters configured set the EAP type to PEAP as shown above.
If the EAP type box text is not exactly as shown see “Installing Radio Drivers” earlier in this
chapter, to change the radio CAB file.
Tap the Properties button.
Figure 4-29 Authentication Settings
When first configuring and authenticating, do not validate the server certificate. This allows the
user authentication to be tested. When user authentication is successful, come back to this screen
and validate the server certificate.
