Control Panel Options 87
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
Filters
Access: Start | Settings| Control Panel | RFID | Filters tab
Figure 3-13 RFID Configuration Utility – Filters tab
Tap the Restore Defaults button to set the parameters in the Filters to their factory default setting.
Tap OK to save changes or X to ignore any changes and return to the Control Panel.
Parameters
Default value for all parameters is blank. Tags read and reported are filtered through a logical OR
of the selected mask values.
Select Toggles between a blank and a checkmark. A checkmark in this field allows the
filter on that line to be active at the next and subsequent tag read action.
Field Name The user-friendly name for the filter. Accepts up to 40 alphanumeric characters.
Field is not case sensitive. Duplicate field names are allowed between filters.
Offset The number of characters that offset the mask value from the beginning of the
tag. The range is from 0 to 23 (characters).
Mask Value Accepts up to 24 hexadecimal characters. Field is not case sensitive. Duplicate
mask values are allowed between filters. When filtering EPC decoded tags, the
filter is applied before the tag is converted to EPC.
When the maximum number of characters is exceeded, the mobile device beeps and will not allow
more characters to be entered.
See Also: “Decimal-Hexadecimal Chart”.
