114 Control Panel Options
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
Volume and Sounds
Access: Start | Settings | Control Panel | Volume & Sounds Icon
Set volume parameters and assign sound wav files to CE .NET events.
Note: Control Panel parameters established in Display Properties, Power Properties and
Volume & Sounds Properties remain in effect during RFID configuration and the
resulting read functions.
Factory Default Settings
Volume
Events Enabled
Application Enabled
Notifications Enabled
Volume Middle of Bar
Key click Loud
Screen tap Loud
Sounds
Scheme LOUD!
Follow the instructions on the screen and tap the OK box to save the changes. The changes take
effect immediately.
Figure 3-30 Volume and Sounds
Good Scan and Bad Scan Sounds
Good scan and bad scan sounds are stored in the Windows directory, as SCANGOOD.WAV and
SCANBAD.WAV. These are unprotected WAV files and can be replaced by a WAV file of the
user’s choice. By default a good scan sound on the mobile device is a single 2700 Hz beep, and a
bad scan sound is a double beep.
