A SERVICE OF

logo

156 Cisco Client Configuration
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
Navigate to the Wireless Network Properties configuration screen.
Tap the Properties button.
Check “Validate server” .
Tap OK to dismiss the configuration boxes.
Figure 4-33 Advanced Wireless Settings, Authenticated SSID
Once the authentication completes, the status changes to show the mobile device has authenticated
to the <SSID>, as shown in the figure above.
Tap the IP Information tab and make sure there is a valid IP address as shown in the figure labeled
“IP Information Tab”, earlier in this chapter.