Summit Client Configuration 131
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
Important: Perform a Warm Reset / Suspend and Resume function (after adding a new profile or
changing parameters of an existing profile) to save the changed parameters in the registry.
Main Tab
Factory Default Settings
Admin Login SUMMIT
Radio Enabled
Active Config Default
Figure 4-2 SCU – Main Tab
The Main tab displays information about the radio that includes the SCU (Summit Client Utility)
version, radio driver version, regulatory domain, Summit copyright information, Active Config
profile and status of the radio (e.g. Down, Associated, etc.).
The Active Config (profile) can be switched without logging in to Administrator mode. Selecting
a different profile from the drop down list does not require logging in to Administrator mode. The
profile must already exist. LXE recommends performing a Suspend/Resume function when
changing profiles. Profiles can be created or edited after the Administrator password has been
entered and accepted.
The Disable Radio button is used to disable the radio card. Once disabled, the button label
changes to Enable Radio.
The Admin Login button provides access to editing radio parameters. Config and Global Settings
may only be edited after entering the Admin Login password. The password is case-sensitive.
Once logged in, the button label changes to Admin Logout. To logout, either tap the Admin
Logout button or exit the SCU without tapping the Admin Logout button.
