A SERVICE OF

logo

E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
Appendix A Key Maps
Keypad
Figure A-1 QWERTY Keypad
Note: The key mapping in this appendix relates to the physical keypad. See section titled “Input Panel” for the
Virtual (or Soft) Keypad used with the stylus.
Key Map 101-Key Equivalencies
Note: This key mapping is used on hand held computers that are NOT running an LXE Terminal Emulator.
When using a sequence of keys that includes the 2
nd
key, press the 2
nd
key first then the rest of the key sequence.
Note: When the computer boots, the default condition of NumLock is On and the default condition of Caps (or
CapsLock) is Off. The Caps (or CapsLock) condition can be toggled with a 2
nd
+F1 key sequence. The
CAPS LED is illuminated when CapsLock is On.
Press These Keys and Then
To get this key
2
nd
Shift Ctrl Alt CapsLock
Press this key
Contrast x F6
Volume x F8
Backlight x F10
2
nd
2
nd
Shift Shft
Alt Alt
Ctrl Ctrl
Esc Esc
Space Spc
Enter Enter
Scan
3
Scan
3
Left Scan key default value is Scan. Right Scan key default value is Enter. When RFID Module is
installed, Right Scan key defaults to RFID Read and Left Scan key defaults to Scan or Enter or Field Exit
(5250 only).