92 Control Panel Options
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
Firmware
Access: Start | Settings | Control Panel | RFID | Firmware tab
Select and install RFID firmware upgrades to the RFID module. The upgrade file is selected using
standard Windows functions.
The currently loaded RFID firmware version is displayed. This value cannot be edited by the user.
Figure 3-16 RFID Configuration Utility – Firmware tab
Note: RFID firmware upgrades and subsequent rebooting does not directly cause changes to
any other firmware.
Tap the Restore Defaults button to set the parameters to their last saved default setting. Tap OK to
save changes or X to ignore any changes and return to the Control Panel.
Firmware Upgrade
Tap the Browse button to locate the Firmware Upgrade File on the mobile device to download to
the RFID module. Tap OK in the File Open box to select the file.
Once selected, tap the Download button on the Firmware panel. The upgrade is installed.
When the upgrade process is complete, a pop up dialog box appears indicating a successful or
unsuccessful upgrade.
Tap OK in the pop up dialog box to close the dialog box.
Reboot Reader
Tap the Reboot Reader button. The RFID Reader module reboots. The MX3-RFID is not
rebooted, only the RFID Reader is rebooted.
A pop up dialog box appears indicating a successful or unsuccessful reboot. The mobile device
does not reboot.
Tap OK in the pop up dialog box to close the dialog box.
