Summit Client Configuration 135
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
Parameter Default Explanation
Encryption None Type of encryption to be used to protect transmitted data.
Options are: None, Manual WEP, Auto WEP, WPA PSK,
WPA TKIP, WPA2 PSK, WPA2 TKIP, WPA2 AES, CCKM
TKIP, or CCKM AES.
Note: The Encryption type chosen determines if the WEP/PSK
Keys button is active and also determines the available
entries in the WEP or PSK pop-up window.
Status
Figure 4-5 SCU – Status Tab
This screen displays information on the current profile and radio connection. Information cannot
be edited or changed on the Status panel. The panel displays:
• The config profile being used
• The client name, IP address and MAC address
• The status of the radio connection (down, associated, etc.)
• The name, IP address and MAC address of the Access Point maintaining the
connection to the network.
• Signal strength (changes with network activity).
• Channel currently being used for wireless traffic.
• Current transmit power in mW.
• Bit rate in Mbit.
