124 API Calls
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
Data Format Commands
MASK_DEFINE Allows definition of a set of six masks, each containing a Field Name,
Offset, and Mask Value. Updates registry values.
MASK_READ Reads Class 0 tags or Class 1 tags depending on the value passed in for
TAG_TYPE parameter. Allows a maximum of six masks as an Input.
SET_PREAMBLE Sets preamble for the output of all read commands (TAG_0_READ,
TAG_1_READ, and MASK_READ)
SET_POSTAMBLE Sets postamble for the output of all read commands (TAG_0_READ,
TAG_1_READ, and MASK_READ)
SET_SEPARATOR Sets tag separator for the output of all read commands (TAG_0_READ,
TAG_1_READ, and MASK_READ)
Power Commands
READER_POWER_TIMEOUT Sets the timeout for the Reader Power Management to kick in.
When the driver is inactive for the specified time, it puts the
reader into “Disabled” mode to conserve power.
Reader Feedback Commands
NOTIFY_READ_SUCCESS Turn ON/OFF beep on a read operation that results in one or
more tags read. See table below.
NOTIFY_READER_ON Turn ON/OFF buzz on a read operation that does not produce
a beep. See table below.
Read Result
Settings
Tag(s) Read No Tags Read
Beep On / Buzz On Beep Buzz
Beep On / Buzz Off Beep No sound
Beep Off / Buzz On Buzz Buzz
Beep Off / Buzz Off No sound No sound
LXE RFID Get Data Commands
Get_Data Returns the tag data acquired in the last RFID Read.
WM_LXE_RFIDFULL message indicates that RFID Read is
complete.
WM_LXE_RFIDFULL Indicates that the RFID Read is complete.
