A SERVICE OF

logo

160 Cisco Client Configuration
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
WPA/LEAP
LEAP is a Cisco proprietary authentication protocol and is not supported by the Microsoft
supplicant. To configure the mobile device for WPA/LEAP, use the Cisco ACU installed during
normal installation of the Cisco client driver.
Cisco ACU
Start the Cisco ACU by tapping the icon on the desktop or navigate to Start | Programs | Cisco |
ACU.
Tap the Profile tab.
Figure 4-40 WPA/LEAP using ACU Profile Tab
Tap the Rename button.
Name the profile.
Figure 4-41 Renaming Profile
Tap the Edit . . . button.