Control Panel Options 73
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
Display
Access: Start | Settings | Control Panel | Display Icon
Set background graphic, color scheme appearance, and power scheme properties.
Note: Control Panel parameters established in Display Properties, Power Properties and
Volume & Sounds Properties remain in effect during RFID configuration and the
resulting read functions.
Factory Default Settings
Background
Windows CE
Tile Disable
Appearance
Scheme:
Monochrome
Color
High Contrast White
Windows Standard
Backlight
Battery Power Auto Turn Off Enabled
Idle Time 3 Seconds
External Power Auto Turn Off Enabled
Idle Time 2 minutes
Background
There is no change from general desktop PC Display Properties / Background options. Adjust the
settings and tap the OK box to save the changes. The changes take effect immediately.
Appearance
No change from general desktop PC Display Properties / Appearance options. Adjust the settings
and tap the OK box to save the changes. The changes take effect immediately. The default is
Windows Standard for color displays.
Note: The color screens display Windows standard colors (or the color scheme selected)
instead of shades of grey.
Backlight
To save battery life, you can adjust when the display automatically
shuts off.
Automatically turn off backlight while on battery power.
Automatically turn off backlight while on external power.
Turn off after
of continuous idle time.
Turn off after
of continuous idle time.
Background
Backlight
Appearance
Display Properties
Figure 3-6 Display Properties / Backlight Tab
Adjust the settings and tap the OK box to save the changes. The changes take effect immediately.
When the backlight timer expires, the color transmissive backlight is dimmed -- not turned off.
