LXE E-EQ-MX3RFIDRG-A Manual

A SERVICE OF

next previous

146 Summit Client Configuration

MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A

WPA PSK Authentication

Start the Summit Utility by tapping the Summit Client icon.

Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.

Tap the Config tab.

Figure 4-16 Summit Profile with WPA/PSK Encryption

Enter the SSID of the Access Point assigned to this profile.

Set Auth Type to Open.

Set EAP Type to None.

Set Encryption to WPA PSK.

Tap the WEP/PSK Keys button.

Figure 4-17 Summit PSK Entry

Enter the Passphrase in the PSK Entry popup text entry box. This value can be a 64 hex character

or an 8-63 byte ASCII value. Tap OK

Tap the Commit button to save the new profile configuration.

Perform a warm reset to connect using the new profile configuration.

Tap the Main tab. The screen shows the “WPA PSK” Active Config is Associated after the radio

connects to the network.