A SERVICE OF

logo

Summit Client Configuration 145
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
WPA/LEAP Authentication
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.
Tap the Config tab.
Figure 4-14 Summit Profile with LEAP for WPA TKIP
Tap the Credentials button.
Figure 4-15 Summit WPA/LEAP Credentials
Enter the Username or Domain \Username in the Credentials popup text entry box.
Enter the Password. Tap OK.
Tap the Commit button to save the new profile configuration.
Perform a warm reset to connect using the new profile configuration.
Please see “LEAP w/o WPA” earlier in this section to configure the radio for LEAP without
WPA.