118 Utilities
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
REGLOAD.EXE
Double-tapping a registry settings file (e.g. REG) causes RegLoad to open the file and make the
indicated settings in the registry. This is similar to how RegEdit works on a desktop PC. The .REG
file format is the same as on the desktop PC.
WARMBOOT.EXE
Double tap this file to warm boot the computer (i.e., all RAM is preserved). It automatically saves
the registry before rebooting which means configuration changes are not lost.
WAVPLAY.EXE
Double-tapping a sound file (e.g. WAV) causes WavPlay to open the file and run it in the
background.
Enabling GrabTime
The MX3-RFID has a GrabTime utility which can automatically synchronize the MX3-RFID with
a time server (via an Internet connection) at boot up.
By default, using GrabTime for time synchronization at boot up is Off. Grabtime can be run at any
time (even when Off at boot up) using the Sync button on the Date/Time control panel.
To enable GrabTime to run automatically at boot up, run \Windows\tmsync.reg and perform a
warmboot. For more detail, see “LAUNCH.EXE”, earlier in this chapter.
Note: This utility affects the behavior of GrabTime at warmboot. After a coldboot, GrabTime is
disabled.
Disabling the Touchscreen
To disable the touchscreen, run \Windows\TouchDisable.reg and perform a warm reboot.
To enable the touchscreen, run \Windows\TouchEnable.reg and perform a warm reboot.
Note: These utilities affect the behavior of the touchscreen on warmboot. After a coldboot, the
touchscreen is enabled. Enable this option with caution.
Troubleshooting
Touchscreen is not accepting stylus
taps or need recalibration.
Press <Ctrl>+<Esc> to force the Start Menu to appear.
Use the tab, backtab and cursor keys to move the cursor
from element to element.
