A SERVICE OF

logo

Control Panel Options 75
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
Keyboard
Access: Start | Settings | Control Panel | Keyboard Icon
Set key repeat delay and key repeat rate.
Factory Default Settings
Repeat Enable
Delay Short
Rate Slow
Key Map 0409
There is no change from general desktop PC Keyboard Properties options. Adjust the settings and
tap the OK box to save the changes. The changes take effect immediately.
When new key maps are added to the registry, they appear in the Key Map dropdown list on the
Keyboard Panel.
These values do not affect virtual keyboard taps.
Mixer
Access: Start | Settings | Control Panel | Mixer Icon
Adjust the volume, record gain, and sidetone for microphone input or headphone use.
Factory Default Settings
Master Volume 0dB
Record Gain 22.5dB
Sidetone 12.0dB
Input None
Figure 3-7 Mixer
Select the Input for the mixer. Move the sliders to adjust the decibel level. Tap OK to save the
settings.
Note: Set Input to “None” when using stereo headphones. Set Input to “Mic1” when using a
mono headset with microphone.