A SERVICE OF

logo

32 The Passive Vehicle Cradle
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
Before installation begins, verify you have the applicable vehicle mounting RAM ball assembly
components necessary for your mount type, as shown in the section titled “Passive Cradle
Assembly Components”.
Do not slide the mobile device into the passive cradle until the cradle is securely fastened to
the vehicle.
Passive Cradle Assembly Components
Note: LXE does not supply the bolts or washers needed when mounting the RAM ball to the
vehicle chassis. LXE recommends using bolts with a maximum 10/32” (0.3125) diameter.
Passive Cradle
RAM Ball and Arm Cylinder
Qty 4 - Hex Cap 1/4-20 x 3/4 bolts
Qty 4 - 1/4 flat washer
Qty 4 - 1/4-20 nylon insert lock nuts
Figure 1-18 RAM Bracket Kit Components
Mount the RAM ball to the bottom of the cradle with the bolts, washers and nuts supplied by
LXE.