A SERVICE OF

logo

Open as PDF
next previous
Summit Client Configuration 141
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
WEP Keys
Please see your System Administrator for complete information about your network WEP key
requirements.
To connect using WEP, use the following minimum required profile options..
• Auth Type = Open
• EAP Type = None
• Encryption = Manual WEP
Tap the WEP/PSK Keys button. The WEP Key Entry text entry box appears.
Figure 4-9 Summit WEP Keys
Enter the WEP key. If there are more than one set of keys, tap the radio button in front of the Key
to be used.
Valid values are 10 characters (for 40 bit encryption) or 26 characters (for 128 bit encryption)
hexadecimal characters.
Tap OK. Tap the Commit button. Warm boot the mobile device.