A SERVICE OF

logo

84 Control Panel Options
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
Tags
Note: An MX3-RFID manufactured before August 2006 may require an update to support Class
1 Gen 2 tags. Please contact your LXE representative for assistance.
Access: Start | Settings | Control Panel | RFID | Tags tab
Tags
Read Power
Class 0 Singulation
RFID Configuration Utility
Reader Output
Restore
Defaults
Tag Types to Read
Filters
Firmware Format
Or
Figure 3-12 RFID Configuration Utility – Tags tab
Note: MX3-RFID is restricted to 95% for Modulation. LXE recommends using the default
setting of ID2 for Class 0 Singulation.
Data output from tags read is sent in character mode to the keyboard buffer. A pop up option box
is displayed if the user attempts to deselect all tags. At least one class must be selected before the
user can continue.
Tap the Restore Defaults button to set the parameters in the RFID Configuration Utility menu
panels to their factory default settings.