Getting Started 11
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
Connect External Power Supply (Optional)
The LXE-approved AC Power Adapter is only intended for use in a 25ºC (77ºF) maximum ambient
temperature environment.
There are three external power supplies available for the mobile device and the MX3 desktop
cradle:
• US AC/DC 12V Power Supply
• Cigarette Lighter Adapter
• International AC/DC 12V Power Supply
Figure 1-8 US AC/DC 12V Power Supply and Automotive Power Adapter
Figure 1-9 International AC/DC 12V Power Supply
The DC power jack is located on the endcap.
Figure 1-10 Connect External Power Supply
1. Insert the barrel connector into the power jack on the endcap and push in firmly.
2. The CHGR LED above the keypad illuminates when the mobile device is receiving
external power through the power jack.
Note: When the mobile device is receiving external power the CHGR LED above the keyboard
is illuminated.
See section titled “LED Functions” for explanations of the LEDs for the BATT B and BATT M
illuminations.
