132 Summit Client Configuration
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
Admin Login
Config and Global parameters may only be edited after entering the Admin Login password. The
password is case-sensitive.
Once logged in, the button label changed to Admin Logout. The admin is automatically logged out
when the SCU is exited.
The Admin can either tap the Admin Logout button, or a navigation button (X or OK), to logout.
The Admin remains logged in when the SCU is not closed and the mobile device is warmbooted.
To login to Admin mode, tap the Admin login button.
Figure 4-3 Admin Password Entry
Enter the Admin password and tap OK. If the password is incorrect, an error message is displayed.
The default password is SUMMIT.
Note: The password is case sensitive!
The Admin password can be changed, by the administrator, using Global Settings.
