116 Utilities
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
DWORD, representing the number of seconds to wait after installing the CAB file, but before
activating the slot (a latency to allow the thread loading the driver to finish installation). The
default value of 0 means the slot is not powered on. The default values for the default radio drivers
(listed below) is 1, meaning one second elapses between the CAB file loading and the slot
powering up.
Note that the auto-launch process can also launch batch files (*.BAT), executable files (*.EXE),
registry setting files (*.REG), or sound files (*.WAV). The mechanism is the same as listed
above, but the appropriate CE application is called, depending on file type.
Registry information is already in the default image for the following
1
:
; Summit Client
[HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist\Summit Radio]
"FileName"="\SYSTEM\SUMMIT.CAB"
"Installed"=dword:1
"FileCheck"="\WINDOWS\SDCCFG10G.DLL"
"Order"=dword:02
"Delay"=dword:0
"PCMCIA"=dword:1
; Cisco Client
[HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist\Cisco Radio]
"FileName"="\SYSTEM\CISCO.CAB"
"FileCheck"="\WINDOWS\CISCO.DLL"
“Order”=dword:01
“PCMCIA”=dword:1
; this key installs RFID drivers/default values from the CAB file
[HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist\RFID]
"FileName"="\WINDOWS\RFID.CAB"
"FileCheck"="\WINDOWS\RFID_WDG.DLL"
“Order”=dword:0C
; this key installs RFTERM from the CAB file
[HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist\LXE TE]
"FileName"="\SYSTEM\RFTERM.CAB"
"FileCheck"="\WINDOWS\LXE\RFTERM.EXE"
“Order”=dword:10
; this key installs JAVA
[HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist\Java]
"FileName"="\SYSTEM\JEODE.CAB"
"FileCheck"="\WINDOWS\EVM.EXE"
“Order”=dword:30
; this key runs RFTERM as a startup app
[HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist\RFTERM]
"FileName"="\WINDOWS\LXE\RFTERM.EXE"
"FileCheck"="dummy"
“Order”=dword:40
1
CAB files for options not purchased are not loaded e.g. JAVA or RFID. If a CAB file is missing, please
contact your LXE Representative.
