Cisco Client Configuration 159
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
Server Authentication
To validate the server certificate install the root CA certificate. For instructions for installing, see
“Root Certificates”, earlier in this chapter.
Figure 4-38 Authentication Settings, Validate Server
Navigate to the Wireless Network Properties configuration screen.
Tap the Properties button.
Check Validate server .
Tap OK to dismiss the configuration boxes.
Figure 4-39 Advanced Wireless Settings, Authenticated SSID
Once the authentication completes, the status changes to show the mobile device has authenticated
to the <SSID>, as shown in the figure above.
Tap the IP Information tab and make sure there is a valid IP address as shown in the figure labeled
“IP Information Tab”, earlier in this chapter.
