Summit Client Configuration 139
E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide
Parameter Default Function
RTS Thresh 2347 If the packet size exceeds the specified number of bytes
set in the Request to Send (RTS) threshold, an RTS is
sent before sending the packet. A low RTS threshold
setting can be useful in areas where many client
devices are associating with the Access Point.
Options are: Any number between 0 and 2347.
Ping Payload 32 bytes Maximum amount of data to be transmitted on a ping.
Options are: 32 bytes, 64, 128, 512, or 1024 bytes.
Ping Timeout
ms
5000 The amount of time, in milliseconds, that a device will
be continuously pinged. The Stop Ping button can be
tapped to end the ping process ahead of the ping
timeout.
Options are: Any number between 0 and 30000 ms.
Ping Delay ms 1000 The amount of time, in milliseconds, between each
ping after a Start Ping button tap.
Options are: Any number between 0 and 30000 ms.
LED Off The LED on the radio card is not visible to the user
when the radio card is installed in a sealed mobile
device.
Options are: On, Off.
Hide Password On If On, the Summit Config Utility masks passwords as
they are typed and when they are viewed.
Options are: On, Off.
Admin
Password
SUMMIT A string of up to 64 alphanumeric characters that must
be entered when the Admin Login button is tapped. If
Hide Password is On, the password is masked when
typed in the Admin Password Entry text box. The
password is case sensitive.
Options are: none.
Certs Path System A valid directory path, of up to 64 characters, where
WPA Certificate Authority and User Certificates are
stored on the mobile device. LXE suggests ensuring the
directory path currently exists before assigning the path
in this parameter. See sections titled “Root
Certificates” and “User Certificates” later in this
chapter for instructions on obtaining CA and User
Certificates.
Options are: none.
