Filter
Top Products
OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER
69
LOADING AND UNLOADING CARTRIDGES IN THE TAPE DRIVE
5.
5.5.
5. Press to display the cell selection screen:
6.
6.6.
6. Press or to scroll through the occupied cell locations until the one
you want appears.
7.
7.7.
7. Press to start the load operation (or to cancel the operation).
When the specified cartridge cell is in position at the tape drive, the
cartridge is loaded into the drive. A series of status messages appears
during the operation, followed by the Command menu when the operation
is complete.
8.
8.8.
8. Press (as needed) to return to the Home screen.
UNLOADING A CARTRIDGE FROM THE TAPE DRIVE
To unload a cartridge from the tape drive:
1.
1.1.
1. At the Home screen, press , , , or to access the main menus.
If necessary, enter the operator panel password (see page 42).
2.
2.2.
2. Press or until the Command menu appears:
3.
3.3.
3. Press to see the menu selections.
4.
4.4.
4. Press or until the following screen appears:
5.
5.5.
5. Press to display the cell selection screen:
The autoloader automatically selects the empty cell closest to the tape drive.
If you want to unload the cartridge to a specific cell, press or to scroll
through the available empty cell locations until the one you want appears.
L o a d D r i v e
F r o m C e l l # n
S e l e c t a C o m m a n d
U n l o a d D r i v e
U n l o a d D r i v e
I n t o C e l l # n