Exabyte 1X7 LTO Compact Loader User Manual


 
OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER
135
TAPE ALERT FLAGS
Drive CMD Error The tape drive received an invalid
command.
1. If possible, use the operator panel to
unloaded any cartridge that is in the
tape drive (see page 69).
2. Power the autoloader off and back on
to reset the tape drive.
3. If the error persists, contact Exabyte
Technical Support (see page iii) or your
service provider.
Drive Load Fail The cartridge couldn’t be loaded
into the tape drive because of a
mechanical problem or because of a
broken tape.
1. Export the tape from the autoloader
(see page 66) and verify that it is in
good condition, then retry the
operation.Replace the cartridge if
necessary.
2. If the error persists, contact Exabyte
Technical Support (see page iii) or your
service provider.
Drive Timeout The tape drive took too long to load
or unload a tape, or the tape drive is
not responding.
1. If possible, use the operator panel to
unloaded any cartridge that is in the
tape drive (see page 69).
2. Power the autoloader off and back on
to reset the tape drive.
3. If the error persists, contact Exabyte
Technical Support (see page iii) or your
service provider.
Drv Unload Fail The cartridge couldn’t be unloaded
from the tape drive because of a
mechanical problem.
1. Power the autoloader off and back on
to reset the tape drive.
2. Retry the unload operation once.
3. If the error persists, contact Exabyte
Technical Support (see page iii) or your
service provider.
H/W Inoperable An operation couldn’t be completed
because of a mechanical problem.
1. Reset the autoloader and retry the
operation.See page 74 for reset
instructions.
2. If the error persists, contact Exabyte
Technical Support (see page iii) or your
service provider.
Hardware Error An operation couldn’t be completed
because of a mechanical problem.
1. Reset the autoloader and retry the
operation.See page 74 for reset
instructions.
2. If the error persists, contact your service
provider.
Table C-1 Autoloader error messages (continued)
Error Message Description Corrective Action