Filter
Top Products
42
PRODUCT MANUAL 1012581
CHAPTER 3—CONFIGURING THE AUTOLOADER
10.
10.10.
10. Press until the Home screen appears. Press again or wait two
minutes without pressing any buttons for the password to take effect.
Note: If you want to continue using menus after you have set a password,
do not press the additional time after reaching the Home screen.
The password will not take effect until you have pressed an
additional time at the Home screen or you have pressed no buttons
for two minutes.
When password protection is in effect, you must enter the password before
you can use the operator panel menus. Each time you return to the Home
screen and press an additional time (or wait two minutes), password
protection is re-activated; you must enter the password again to access the
menus.
Accessing Password Protected Operator Panel Menus
If you need to gain access to the operator panel menus, but want password
protection to remain in effect:
1.
1.1.
1. At the Home screen, press , , , or . The password entry screen
appears:
a.
a.a.
a. Enter the password you set previously.
b.
b.b.
b. Use or to move through character positions in the password.
c.
c.c.
c. Use or to enter or change characters.
d.
d.d.
d. Press and hold or to move rapidly through the available
characters.
2.
2.2.
2. Press . You now have access to the operator panel menus.
3.
3.3.
3. After you have finished using the menus, press until the Home screen
appears. Then, press again or wait two minutes without pressing any
buttons for password protection to be reactivated.
Turning Off the Operator Panel Password
To turn off password protection for the operator panel:
1.
1.1.
1. At the Home screen, press , , , or . The password entry screen
appears:
E n t e r P a s s w o r d
> > > > < < < < <
E n t e r P a s s w o r d
> > > > < < < < <