Filter
Top Products
OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER
85
VIEWING BASIC TAPE DRIVE INFORMATION
f.
f.f.
f. Press . The power supply fan status screen appears:
This screen indicates the current status of the autoloader’s power supply
fan:
Running—the power supply fan is operating normally
Has stopped—the power supply fan is not operating
Contact Exabyte Technical Support (see page iii) if your autoloader
experiences problems.
5.
5.5.
5. Press (as needed) to return to the Home screen.
VIEWING BASIC TAPE DRIVE INFORMATION
To check the tape drive’s firmware code version, serial number, and SCSI ID:
1.
1.1.
1. At the Home screen, press , , , or to access the main menus.
If necessary, enter the operator panel password (see page 42).
2.
2.2.
2. Press or until the Status menu appears:
3.
3.3.
3. Press to see the menu selections, then press or until the following
screen appears:
4.
4.4.
4. Press . The firmware screen appears:
a.
a.a.
a. Press . The serial number screen appears:
P o w e r s u p p l y f a n
i s r u n n i n g .
V i e w a S t a t u s
V i e w D r i v e
I n f o r m a t i o n ?
D r i v e F W l e v e l
n n n n n n n n n n n n
D r i v e S e r i a l # :
n n n n n n n n n n n n