Filter
Top Products
64
PRODUCT MANUAL 1012581
CHAPTER 5—AUTOLOADER OPERATION
INSERTING CARTRIDGES INTO THE AUTOLOADER
To insert cartridges:
1.
1.1.
1. At the Home screen, press , , , or to access the main menus.
If necessary, enter the operator panel password (see page 42).
2.
2.2.
2. Press or until the Command menu appears:
3.
3.3.
3. Press to see the menu selections, then press or until the following
screen appears:
4.
4.4.
4. Press to display the cell selection screen:
The autoloader automatically selects the empty cell closest to the door.
5.
5.5.
5. Press or to scroll through the available (empty) cell locations to select
a different cell.
6.
6.6.
6. Press to start the import operation (or to cancel the operation).
When the specified cartridge cell is in position at the cartridge access port,
the door slides open and the following message appears:
a.
a.a.
a. Position the cartridge with the hub down and the bar code label and
write-protect switch towards the door, as shown in Figure 5-4.
S e l e c t a C o m m a n d
I m p o r t
C a r t r i d g e s
I m p o r t C a r t r i d g e
T o C e l l # n
L o a d t a p e , l a b e l
i n , p u s h a n y k e y