Filter
Top Products
118
PRODUCT MANUAL 1012581
CHAPTER 9—SHIPPING THE AUTOLOADER
5.
5.5.
5. Place the foam pads over the foam cushions, as shown in Figure 9-9.
6.
6.6.
6. If you are shipping the rail kit with the autoloader, set the rail kit box into
the center of the shipping carton on top of the foam pads, as shown in
Figure 9-7.
7.
7.7.
7. Place any necessary paperwork on top of the autoloader.
8.
8.8.
8. Close and seal the box.
9.
9.9.
9. Place the shipping label on the box.
Figure 9-9 Autoloader in shipping box with top foam pads
!
! !
! Important
Do not ship the rail kit if you are returning the autoloader for
service. Pack the rail kit with the autoloader only if you are sending
the autoloader to a new location.
Figure 9-10 Accessory kit in shipping box (do not ship accessory kit if returning
autoloader for service)