Filter
Top Products
OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER
33
SETTING CONFIGURATION OPTIONS
Note: You do not have to use the autoloader’s Autoclean option to clean the
tape drive. You can choose from several other cleaning methods, including
using your software’s cleaning function and using commands available
through the operator panel. See page 70 for information about these
cleaning alternatives.
Setting up automatic tape drive cleaning involves two procedures:
Activating the Cleaning Cartridge Cell
Enabling the Autoclean Option
Activating the Cleaning Cartridge Cell
Activating the cleaning cartridge cell designates cartridge cell 7 as the storage
location for a cleaning cartridge.
To activate the cleaning cartridge cell:
1.
1.1.
1. At the Home screen, press , , , or to access the main menus.
If necessary, enter the operator panel password (see page 42).
2.
2.2.
2. Press or until the Configuration menu appears:
3.
3.3.
3. Press to see the menu selections.
4.
4.4.
4. Press or until the following screen appears:
5.
5.5.
5. Press to display the cleaning cartridge cell activation screen:
6.
6.6.
6. Press or to switch between OFF and ON.
!
! !
! Important
If you plan to use automatic cleaning, cleaning cartridge must be
installed in cartridge cell 7 of the autoloader (see page 62).
If your autoloader software has a cleaning option, be sure to turn
that option OFF.
C h a n g e a
C o n f i g u r a t i o n
C h a n g e F i x e d C l n
C e l l , N o w i t s O F F
S e l e c t F i x e d C l n
C e l l , N o w i t s O F F