Filter
Top Products
8
PRODUCT MANUAL 1012581
CHAPTER 2—INSTALLING THE AUTOLOADER
COMPLETING THE UNPACKING PROCESS
The robotic cartridge loader inside the autoloader is secured with a small metal
shipping key to keep the loader from moving during shipping. Before
operating the autoloader, you must remove this shipping key. To remove the
shipping key:
1.
1.1.
1. Remove the adhesive label securing the shipping key to the autoloader (see
Figure 2-1).
2.
2.2.
2. Lift the shipping key up and out of the slot in the top of the autoloader (see
Figure 2-2).
3.
3.3.
3. Save the shipping key with the autoloader’s packing materials in case you
need to move or ship the autoloader later.
!
! !
! Important
After unpacking the autoloader, save all the original packing
materials in case you need to ship or move the autoloader later.
Figure 2-1 Label over shipping key
Figure 2-2 Removing the shipping key
Remove this label
Shipping
key