Filter
Top Products
126
PRODUCT MANUAL 1012581
APPENDIX A—SPECIFICATIONS
UNITED STATES: FCC DECLARATION OF CONFORMITY
CANADIAN VERIFICATION
EUROPEAN COMMUNITY
We declare under our sole responsibility that:
Product Name: Magnum 1x7 LTO Autoloader
To which this declaration relates, is in conformity with the following standard(s) or
other normative documents:
ANSI C63.4-1992 Methods of Measurement
Federal Communications Commission 47 CFR Part 15, Subpart B
15.107 (b) Class A Conducted Limits
15.109 (b) Class A Radiated Emission Limits
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with this manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
Shielded cables are required for this device to comply with FCC Rules. Use shielded cables when
connecting this device to others.
This Class A digital apparatus complies with ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
This Information Technology Equipment has been tested and found to comply
with the following European directives:
(1) EMC Directive 89/336/EEC, amended by directive 93/68/EEC, according to:
EN55022 (Class A)
EN55024
EN 61000-3-2
EN 61000-3-3
(2) Low Voltage Directive 73/23/EEC, amended by directive 93/68/EEC,
according to:
EN60950-1:2001