Filter
Top Products
44
PRODUCT MANUAL 1012581
CHAPTER 3—CONFIGURING THE AUTOLOADER
Whichever method you use to enable security (operator panel password or
application), you must also use it to disable security. That is, if you enable a
password at the operator panel, you must disable it at the operator panel. If
you enable security through your application, you must disable it through the
application.
RESTORING THE DEFAULT CONFIGURATION
If necessary you can return all of the autoloader configuration settings to their
default values.
To restore the default configuration values:
1.
1.1.
1. At the Home screen, press , , , or to access the main menus.
If necessary, enter the operator panel password (see page 42).
2.
2.2.
2. Press or until the Configuration menu appears:
3.
3.3.
3. Press to see the menu selections.
4.
4.4.
4. Press or until the following screen appears:
5.
5.5.
5. Press to display the restore default configuration screen:
6.
6.6.
6. Press to reset the defaults (or if you don’t want to make the change).
The autoloader resets and the default configuration settings take effect. The
LCD displays the Home screen.
!
! !
! Important
If you enable security through your application, use of the
cartridge access port is not
prevented. Separate commands for
preventing and allowing use of the cartridge access port may be
available through your application. Refer to your software
documentation for information.
!
! !
! Important
When you use this option all changes that you previously made to
any of the autoloader’s configuration settings are lost.
C h a n g e a
C o n f i g u r a t i o n
C o n f i g u r a t i o n s ?
R e s e t t o D e f a u l t
C o n f i g . N o w ?
L T O 1 X 7 2 U